Concrete Demolition and Breaking made easy with Hilti TE-3000-AVR Heavy Duty Electric Jackhammer. This is the largest of our electric breakers, which is used on horizontal surfaces only.
Working direction: Floor
Weight: 68 lb.
Single impact energy: 62.7 ft-lbf
Full hammering frequency: 858 impacts/minute
Max. chiseling performance: 3660 in³/min
Dimensions (LxWxH): 32.3 x 23.1 x 8.6 in
Triaxial vibration for chiseling into concrete: 6.9 m/s² 1
A-weighted emission sound pressure level: 95 dB (A) 2
- Manufacturer: Bosch
- Weight: 64 lbs
- Power requirement 15amp @ 120v
- Rentals come with both a point and chisel
- Manufacturer: Milwaukee
- Solid bit sizes are available from 1/2" diameter to 1&1/2" diameter, with lengths from 7" to 31"
- Core bit sizes are available from 1&5/8" diameter to 6" diameter with extensions available
- Bits are extra, and please note we only rent bits for concrete. If you are drilling in Rock, the solid bits are available for purchase, and if you require core's, please see our diamond core drill
Working direction: Floor
Weight: 32 lb.
Single impact energy: 25.8 ft-lbf
Full hammering frequency: 1800 impacts/minute
Max. chiseling performance: 866 in³/min
Dimensions (LxWxH): 28.8 x 22.6 x 5.7 in
Triaxial vibration for chiseling into concrete: 4.8 m/s²
A-weighted emission sound pressure level: 77 dB (A)
Working direction: Floor, Wall
Weight: 27.6 lb.
Single impact energy: 19.2 ft-lbf
Full hammering frequency: 1950 impacts/minute
Max. chiseling performance: 476 in³/min
Dimensions (LxWxH): 28 x 5.6 x 12 in
Triaxial vibration for chiseling into concrete: 5.0 m/s²
A-weighted emission sound pressure level: 85 dB (A)
Powerful demolition hammer for heavy-duty chiselling in concrete and masonry, with Active Vibration Reduction (AVR)
- Working direction: Wall
- Tool chuck type: TE-Y (SDS Max)
- Weight according EPTA-Procedure 01/2003: 17.4 lb.
- Full hammering frequency 2760 impacts/minute
- Max. chiselling performance 73 in³/min
- Dimensions (LxWxH) 22.2 x 4.9 x 9.8 in
- Triaxial vibration for chiselling into concrete 6.5 m/s²
Break or Chip concrete with our lightweight Hilti TE 500-AVR. At only 11.2lbs (our smallest jackhammer) reduces operator fatigue, while still getting the job done efficiently
Demolition hammer for light-duty chiselling in concrete and masonry, with Active Vibration Reduction (AVR)
- Manufacturer: Hilti
Model: TE 500-AVR
Weight 11.2lbs - Working direction: Wall
- Tool chuck type: TE-Y (SDS Max)
- Single impact energy: 6.3 ft-lbf
- Full hammering frequency: 3510 impacts/minute
- Max. chiseling performance:61 in³/min
- Dimensions (LxWxH): 18.4 x 4.6 x 10.4 in
- Triaxial vibration for chiseling into concrete: 6.8 m/s² 1