Lawn & Garden

• Manufacturer: Ryan
  Model: Lawnaire IV
• 4HP Honda engine
• up to 2.75″ deep
• 19″ aerating width; 28″ wide overall
• 240 lbs

• Aerating width: 40 in.
• Platform adds additional weight to achieve depth of core

• Large Trap for: racoons, skunks, muskrats, groundhogs, cats
• Small Trap for: squirrels, rabbits, skunks

• Model: EA93HSPT forward and reverse
• Engine: Honda 9 HP
• Towable: yes; requires 2″ ball
• Available bits: 8″, 10″, 12″
• Width: 30″
• Length: 105″
• Weight: 360 lbs

The ECHO Bear Cat WT190 features an Off-set Trim capability. The body of the trimmer can be pivoted up to 13 degrees allowing the cutting line to reach well beyond the left wheel. This makes trimming easy and convenient along retaining walls, fences and other tight areas while eliminating wheel rub.

The WT190 wheeled trimmer comes standard with .155mil nylon cutting line, with specialty Triple Blade Brush Cutter and Sabre Tooth Blade kits available. The 14″ dia. Sabre Tooth Blade can cut saplings and small trees up to 4” in diameter while the 14″ dia. Triple Blade Brush Cutter makes short work of heavy weeds, cattails and underbrush.

• Manufacturer: Briggs and Stratton Quantum
• weight: 77 lbs
• displacement: 190 cc
• Self-propelled: no

Engine: Honda® GXV390
Engine Type: Air-cooled 4-stroke OHV
Displacement: 390cc
Engine Cylinders: 1

Ground Speed – Forward Infinitely-variable, 0-4.2 mph
Ground Speed – Reverse Infinitely-variable, 0-1.7 mph
Cutting Blade: 26” (.25” Thick)

Overall Width: 30” (32” at the Handles)
Cut Height: 3.00” – 5.00”
Cutting Capacity: Saplings up to 2” diameter

Unit Weight: 405 lbs.

• Manufacturer: Classen
  Model: TR-20h
• 5.5hp Honda engine
• 20″ dethatching width
• 27″ overall width
• dry weight 135 lbs

• Manufacturer: Echo
  Model: HC180
• 21.2cc 2-stroke engine
• 30″ blade
• dry weight 12.6 lbs

• Manufacturer: Echo
  Model: PAS265

w/Articulating Hedge clipper Attachment

• Compatible with Echo Power Pro Head model: SRM 230, SRM 2620, SRM 2620T, BRD 2620
• Compatible with older Echo models: SRM 266, SRM 266T, SRM280, SRM 280T
• 8″ blade
• Open face

• Manufacturer: Ariens
• Engine: 159 cc
• Drive system: push
• Fuel capacity: 1 ltr / 0.26 gallons
• Cutting width: 21″
• Cutting height: 1-4″
• Weight: 94 lbs
• Number of blades: 1

Mulch and/or bagger available

• Poly heavy-duty roller 18″ x 24″
• side plug to fill with water
• weight when full – approximately 270 lbs
• rounded ends

• Poly heavy-duty roller 18″ x 36″
• side plug to fill with water
• weight when full – approximately 690 lbs
• rounded ends

• Engine: 25.4 cc / 2 stroke
• Sound: 69 DB
• Dry weight: 11.8 LBS
• Collection bag with rear zipper
• All pipes included to convert from shredder to blower.

• Manufacturer: Split-fire
  Model: 3255
• 5.5hp Honda engine
• log capacity: 30″ – 36″
• 20 tons splitting force
• 8″ knife height
• splits in both directions
• 24″ stroke length
• tows with 2″ ball
• dry weight 440 lbs

• Manufacturer: Belle
  Model: BGBMD300
• 5.5 hp Honda engine
• Fuel tank capacity: 2.5 L
• Max load: 660 lbs (300 kg)
• Heaped capacity: 4-3/4 cu feet
• Max speed: 6 km/h (reverse: 2.6 km/h)
• 2 wheel or 4 wheel drive
• weight: 340 lbs

All manual options.

Post auger – 6″ – 8″ diameter; maximum depth 36″
Post hole spoon – 9″ diameter; 8′ handle

• 23″ shaft
• 3″ maximum post diameter

• Manufacturer: General Equipment
  Model: M330H
• 5.5hp Honda engine
• 6″/8″/10″ diameter

• Manufacturer: Compac
  Model: PHD
• 9hp Honda engine
• 8″/10″/12″ diameter
• 2″ towing coupler

5′

• Manufacturer: Barreto
  Model: E918H
• 9hp Honda Engine
• hydraulic drive
• tine width 18″
• height 28″
• weight 460 lbs
• rear tine

• Manufacturer: Honda
  Model: F220
• mid tines

F220

• tiller type: mid tine
• tilling width: 21″
• tine diameter: 11″
• engine: Honda GXV 57 cc
• transmission speed: 1-forward
• dry weight: 53 lbs

• Manufacturer: Honda
  Model: F501
• mid tines

F501

• Honda 4-stroke engine
• adjustable handlebars
• gears – 2 forward, 2 reverse
• 36″ tilling width
• tine diameter – 11″
• adjustable depth bar
• pull start

• Manufacturer: Ryan
  Model: Jr. Sodcutter
• 18″ cutting width
• 5.5 hp engine
• weight: 373 lbs

• Manufacturer: Toro
• Engine: Honda GX 390
• cutting depth: 11″ below grade
• cutting wheel: 9.5″ diameter (12 tooth)
• dimensions: 29.05″ wide, 76″ long, 42″ high
• dry weight: 240 lbs

• Model: TC 210
• Engine: 21.2 CC
• Tilling width: 9″
• Tilling depth: 9″
• Tines: 4 – 10 tooth hardened steel tines
• Dry weight: 21.6 lbs

• Engine: 2-stroke 25.4 cc
• Bar length: 12″ / 30 cm
• Collapsed length: 107″ / 2.7 m
• Extended length: 146″ / 3.7 m
• Dry weight: 17.4 lbs / 7.8 kg

• Collapsed length: 9′
• Extended length: 14′
• pull rope to cut maximum 1″ diameter branch
• saw cuts up to 8″ diameter
• fibre glass pole

• Manufacturer: Vermeer
  Model: RT60
• 5.5hp Honda engine
• 4″, 8″, or 12″ deep trenches
• dry weight 270 lbs
• machine width 24″

• Manufacturer: Barreto
  Model: E918HM
• 9hp Honda engine
• trench width 4″; depth – up to 18″
• dry weight 620 lbs
• machine width 29″

• Model: Echo SRM 225
• 21.2 cc 2-stroke
• Shaft: 59″ straight
• Dry weight: 12 lbs
• Nylon line: .095 cross-fire

• Model: SRM-266U
• Engine: 25.4 cc 2-stroke
• Shaft length: 59″
• Dry weight: 15 LBS
• Cutting blade: 8″

Blade extra

• Manufacturer: Vermeer
  Model: BC 600XL
• Engine: KOHLER 27 HP
• Material capacity: 6″
• Fuel type: gasoline
• Fuel tank capacity: 7 gallon / 26.5 L
• Max fuel consumption: 2.4 gph / 9.1 lp
• Width: 53-1/2″
  Height: 94″
  Weight: 1900 lbs / 861 kg
• Tongue weight: 220 lbs / 100 kg
• Clutch: manual

• Manufacturer: Vermeer
  Model: BC 700XL
• Engine: Kohler ECH740 25 HP
• Material capacity: 6″
• Fuel type: gasoline
• Fuel tank capacity: 6 gallons / 22.7 L
• Max fuel consumption: 2.4 GPH / 9.1 LPH
• Width: 71″
  Height: 102″
  Weight: 1800 lbs / 816 kg
• Tongue weight: 180 lbs / 81.6 kg
• Clutch: centrifugal